All Products

Compact, lightweight knife for opening lead cables Rugged, forged tempered cutlery steel blade with sharp, chisel-shaped edge Hammer head on back ...

Coping-type blade 2-1/4-Inch (57 mm) long Compact and lightweight Ideal for skinning small wire and cable Blade locks open

Standard spearpoint blade 2-1/2-Inch (64 mm) long Screwdriver-tip blade 2-1/2-Inch (64 mm) long Screwdriver-tip blade locks open Multi-purpose too...

Large, stainless-steel, hawkbill slitting blade 2-3/4-Inch (7 cm) long Ideal for heavy-duty line work Plastic handle Blade locks open

Extra-large curved hawkbill slitting-blade 2-5/8-Inch (67 mm) long Ideal for heavy-duty line work Woodgrain plastic handle Blade locks open Stainl...

Extra-large curved hawkbill slitting-blade 2-5/8-Inch (67 mm) long Ideal for heavy-duty line work Woodgrain plastic handle Blade locks open Blade ...

Curved-sheepfoot skinning blade to 2-3/8-Inch (60 mm) long Standard spearpoint blade to 2-1/2-Inch (64 mm) long Screwdriver-tip blade to 2-1/2-Inc...

No contact between stainless steel ring and hardened steel blade; blade and ring are securely molded in handle Three-inch steel blade withstands f...

Three-inch steel blade withstands frequent scoring and slitting of cable jacket Blade is securely molded in handle Notch on blade back for scrapin...

Replaces Catalog Number 1571-3LR-INS Durable two-layer insulation clearly marked with the official 1000-volt rating symbol Klein's exclusive desig...

2-Inch (51 mm) blade for increased control when scoring and slitting cable jacket Ergonomic handle for maximum comfort Oversized ring for strength...

Designed for use when light, compact grip is desired and where conductor damage is not a factor Works with Messenger and Guy Strand cable diameter...

Designed for use when light, compact grip is desired and where conductor damage is not a factor Works with Messenger and Guy Strand cable diameter...

Designed for use when a light, compact grip is desired and where conductor damage is not a factor Works with Messenger and Guy Strand cable diamet...

Round inside jaw contour for weatherproof coated wire Notches in jaw provide firm grip on insulation Manufactured from drop-forged, heat-treated s...

Round inside jaw contour for weatherproof coated copper wire Notches in jaw provide firm grip on insulation Max Safe Load of 4500-Pound (2041 kg)...

Works on 0.53 to 0.74-Inch (13.46 to 18.80 mm) cable diameter range Round inside jaw contour for weatherproof coated wire Notches in jaw provide f...

Works with 0.74 to 0.86-Inch (18.80 to 21.84 mm) cable diameter range Round inside jaw contour for weatherproof coated wire Notches in jaw provide...

Lightweight, cost-effective grip for solid and stranded #8 AWG to #6 AWG bare copper wire Works within 0.08 to 0.20-Inch (2.0 to 5.1 mm) cable dia...

Pulls #6 to #8 AWG bare copper wire with max safe load of 4500-Pound (2100 kg) Locking loop handles allow the jaws to be held in an open position ...

Works with aircraft, EHS, messenger and guy strand cable Designed for cable sizes from 0.12 to 0.37-Inch (3.05 to 9.40 mm) and has max safe load o...

Works with aircraft, EHS, messenger and guy strand cable Designed for cable sizes from 0.12 to 0.37-Inch (3.05 to 9.40 mm) with maximum safe load ...

Lightweight, cost-effective grip pulls #8 to #6 AWG bare copper wire Single V groove jaw Max Safe Load of 4500-Pound (2100 kg) Locking loop handle...

Designed for use when light, compact grip is desired and where conductor damage is not a factor Gripping pressure of the knurled jaw is applied to...

Ideal for light, compact grip work where conductor damage is not a factor Works with 0.75-Inch to 1.25-Inch (19.05 to 31.8 mm) cable diameter rang...

Cuts wood, plastic and most metals Re-closable, heavy-vinyl, seal-tight pouch Box of 10 blades Weight: 7.2 ounces/pack Made in USA

1/4-Inch Power Nut Driver with a Rare-Earth magnet to retain fasteners for one-handed driving 3-3/4-Inch (9.5 cm) hollow core facilitates work on ...

Designed for use when light, compact grip is desired and where conductor damage is not a factor Works on 0.50 to 1.00-Inch (12.70 to 25.40 mm) wir...

Designed for use when light, compact grip is desired and where conductor damage is not a factor Works on 0.38 to 0.88-Inch (9.65 to 22.35 mm) wire...

Identical to Bell-System type ''H'' strand puller, with max safe load of 15,000-Pound (6803 kg) Equipped with chain, toggle and shackle Outside di...

Designed for 0.31 to 0.62-Inches (7.9 to 15.7 mm) diameter cable sizes with max safe load of 15,000 (6803 kg) Double ''V'' grooves give four-point...

Used for Aircraft, EHS, Messenger, Guy Strand cables Designed for 0.50 to 0.75-Inch (12.7 to 19.05 mm) diameter cable sizes with max safe load of...

Used for Aircraft, EHS, Messenger, Guy Strand cables Designed for 0.75 to 1.0-Inch (19.05 to 25.4 mm) diameter cable sizes with max load of 15,00...

Wide Range Service Grip securely pulls steel, ACSR, AAC, and Copper wires Grip holds a wide wide range of cable sizes reducing the number of grips...

Wide Range Distribution Grip pulls No. 6 Copper to No. 477 ACSR 0.162 to 0.883-Inch (4.11 to 22.42 mm) cable 20-Percent lighter than the Cat. No. ...

EHS Jaw holds a wide range of cable from 0.162-Inch to 0.883-Inch (4.11 to 22.42 mm) 50-Percent lighter than the KT4600 grip One-handed design mak...